Downloads

Pentol - targeted solutions for power plant optimization

Fuel Oil Treatment

How to improve efficiency of fuel oil-fired plants

The power of combining two additives and how to use it for emission reduction and cost saving

What’s in this ebook?

– The rules have changed: optimizers have to cooperate in a complete picture
– Why water-in-oil emulsion is the key to a complete carbon burnout
– Eliminate fouling and corrosion: data-driven answers
– In practice: 15 tips to leverage curation to improve plant

PentoMag® for HFO

How to eliminate corrosion and plugging consistently

PENTOL offers a unique way to improve the eco-efficiency of power plants:
– keep heat transfer components clean and protected
– allow reduction of exit gas temperature by neutralizing SO3

Read our brochure PentoMag® how to inject additive directly into the fuel oil and is activate it in the flame





PentoMuls® for HFO

water-in-oil_emulsion combustion optimization additive

How to reduce ash load with a complete carbon burnout

PentoMuls® allows the on-line production of a stable water-in-oil emulsion:
– get a compact, short flame with a good temperature distribution
– generate much less nitrogen oxide (NOx) and sulphur trioxide (SO3)

Read our brochure PentoMuls®. Learn how the blend of surfactants, dispersants and catalysts works





PentoMag® for Coal

How to prevent hard and sticky slagging

PentoMag® 2550 will be dosed as a slurry by an automatic system on the coal belt:
– transform glassy, heavy deposits (covering heat exchange tubes) into friable and easy to remove
– improve boiler availability without significant losses or longer outage periods

Read our brochure PentoMag® 2550, Learn how the micronized active slurry works




Flue Gas Conditioning for Coal

How to reduce fly ash resistance

PENTOLs FGC-unit injects small quantities of sulfur trioxide into the flue gas duct:
– keep fly ash resistivity in a good precipitator operating a range
– get an economical alternative to an additional ESP that increases the whiteness of your gypsum

Read our brochure Flue Gas Conditioning. Learn how PENTOLs energy-optimized system works






PentoMag® for Diesel Engines

How to reduce sludge and corrosion in diesel engines

PentoMag® 4400 is dosed on the filling line of the day tank or storage tank:
– avoid deposits and corrosion which cause problems on exhaust valve seats, liners, piston rings or even on blades of turbo chargers
– increase the net calorific value of the fuel and reduce the amount of waste disposed
Read our brochure PentoMag® 4400. Learn how to the all-in-one additive increases the efficiency of your diesel engine

 




PentoMag® for Gas Turbines

How to control high-temperature corrosion of gas turbines

PentoMag® 4450 works by modifying the fusion point of combustion residuals:
– neutralize vanadium deposits and corresponding corrosion effects
– reduce fouling in gas turbine and recovery boiler

Read our brochure PentoMag® 4450. Learn how the fuel tank additive works

 



SO3 Analyzer

How much SO3 do you generate?

PENTOLs portable SO3-analyzer allows the on-line monitoring and recording of emission:
– limit acid discharges to the environment
– burn fuel in the most efficient way to minimise corrosion of the plant
Read our brochure SO3 Monitor. Learn more about the wide range of measuring possibilities





PentoSolv 3

How to clean combustion residues at difficult spaces

PentoSolv 3 is a powerful cleaning agent:
– remove encrusted deposits on surfaces of cylinder heads, boiler walls, heat exchangers etc.
– soften solid layers before washing, so that cleaning becomes easy with much better results
Read our brochure PentoSolv 3. Learn how the powerful blend of detergents works

 



PENTOL

Company profile

PENTOL is specialized in combustion optimization for power plants since 1969:
– development and production of additives
engineering and installation of dosing equipment
analytics

Read our brochure and learn more about the wide range of measuring possibilities