PentoMag® | Additive for Stationary Diesel Engine
#Increase Efficiency and #Avoid Corrosion and Deposits

PentoMag® for diesel engines

Simply explained

What does PentoMag® 4400 do?

The all-in-one diesel additive is suitable for burning low quality heavy oils.

The additive disperses the sludge in the tank and helps to burn it.

The separator has less work. Deposits can be burned. The total calorific value increases.

The engine stays protected from combustion residuals and corrosions.

This has also a great effect on the blades of the turbo and the heat pipes in the recovery boiler.

PENTOL ASSISTS YOU DURING THE WHOLE PROCESS

  • Consultation and engineering assistance
  • Dosing equipment installation
  • PentoMag supply
  • Emissions testing and combustion optimization

[Situation]   »   [Challenge]   »   [Pentol]   »   [Plan]   »   [Action]   »   [Results] 

Summary

PentoMag® for Diesel has been developed with three goals in mind:

  1. Protect the diesel engine and turbo loader from corrosion and deposits
  2. Reduce emission
  3. Reduce fuel consumption

PentoMag® for Diesel is the result of a deep cooperation with one of our clients, where this additive has been developed custom designed for the clients need.

PentoMag® for Diesel is more than a corrosion inhibitor.

It´s a balanced blend of

  • cracking-catalysts
  • fuel-homogenizers
  • combustion-catalysts
  • corrosion-inhibitors

PentoMag® for Diesel increases the overall efficiency of diesel engines by around 5%.
This may sound unbelievable, but we can achieve this goal by optimizing not only the engine itself, but most of all the fuel oil treatment station.

Reduce sludge from storage tanks and burn it with the help of the combustion improver

Neutralize corrosion in turbo and recovery boiler

Reduce emission

Action principle

Dispersing of asphaltenes

Reducing the amount  of sludge disposed

The additive includes sludge dispersing solvents and water emulsifiers

Increasing the net calorific value

Disaggregate heavy fractions of the fuel oil to improve volatilization. PentoMag® 4400 is best dosed on the filling line of the day tank or storage tank by means of a simple dosing pump. Disaggregate heavy fractions of the fuel oil to improve volatilization. In the storage tank, the heavy asphaltene chains are broken up, reducing the formation of sludge and sedimentation in the tank.
In addition, PentoMag® 4400 includes sludge dispersing solvents to stabilize the fuel, keep tanks and tank trucks free from sludge deposits and prevent the formation of sludge on the injection pumps and nozzles. Increasing the net calorific value As shown in the pictures above, a more stable fuel means that less fuel is absorbed in the separator, while maintaining the function of the separator to absorb sediments and solids.
Reducing the amount of sludge disposed has a variety of advantages: 1.) It reduces the total fuel oil consumption. Typically 10% of the fuel is absorbed in the separators, whereof approx. half of it can easily be used as proper fuel. This fuel oil saving is considerable and typically pays the whole fuel oil treatment and more! 2.) The volume of sludge produced is reduced by about 50%. This is a further cost reduction to the plant and a heavy reduction in handling and processing of sludge.
Benefits

Combustion catalyst

Increase combustion surface and speed

The catalyst in PentoMag® 4400 evokes a reduction of the activation energy of the fuel.

  • carbon burn out is more complete
  • less oxygen needed
  • producing less smoke and ash
  • more efficiency reduces fuel consumption
The combustion catalysts main task is to reduce the emission of unburned carbon. With a higher amount of asphaltenes and heavy fractions of the fuel ending up in the diesel engine, this is very important to keep the combustion inside the diesel engine clean and the stack free of a black cloud. PentoMag® 4400 contains catalyst that reduce the activation energy required for combustion of the fuel. Atomized fuel will burn faster and the amount of unburned carbon in the emission is reduced by >50%. This reduces fouling in the diesel engine itself but also in the turbo charger and recovery boiler and creates a visible reduction of solid emission on the stack. As the total dust load carried through the diesel engine is reduced, the time required for cleaning deposits is reduced as well. Turbo charger efficiency is increased as fouling is reduced a lot and the remaining deposits can be removed without applying force, preventing damage to the blades.
Dosing skid

Vanadium inhibitor

Ash particles stick to cool surfaces and build up deposits.
The additive works by modifying the fusion point of the combustion residuals.
Even though the ash load has been reduced by half, one problem remains: The melting point of vanadium contained in the fuel is too low and leads to deposits on the cylinder walls, valves and on the turbo. PentoMag 4400 contains magnesium that is modifying the fusion point of these combustion residuals. Sodium, Vanadium and Sulfur compounds can form molten deposits in the engine, turbo and recovery boiler. At low temperatures, sulfuric acid is formed, ash particles stick to cool surfaces and build up deposits. PentoMag 4400 prevents formation of these deposits, extending lifetime of all parts. The corrosion inhibitor is a magnesium compound, increasing the pH of the fly ash above 6. As the SO3 and sulfuric acid produced during combustion are neutralized by PentoMag 4400, corrosion on cylinder walls is reduced. The TBN of the lubricating is affected as well, as less acidity is carried over to the lubricating oil, extending its lifetime.
Maintenance

Availability

Reducing fouling leads to

  • reduced maintenance work
  • extended lifetime

Pentol expects a fuel oil saving in the order of 2-5 %, depending on the fuel characteristics, combustion parameters and the general condition of the diesel engine.

Efficiency

Dosing Equipment

We offer a range of individual dosing equipment with minimal maintenance and maximal precision.

Get support from Pentol at

  • Storage of chemicals
  • Commissioning of dosing unit
  • Setting up individual parameters
  • Emission measurement and monitoring
 

Download PDF

ADDITIVE – PentoMag for Diesel Engines » EN

 English

ADDITIVE – PentoMag for Diesel Engines » ES
Spanish