Cleaning airfilters with PentoSolv 3

Pictures
Deposits and plugging in energy industry
Solve cooling problems from corrosion and contamination at fan
Deposits on clogged air heater
A refreshed air filter after cleaning

About this project
Cleaning heat exchanger surfaces, boiler walls, fuel oil centrifuges, cylinder heads etc. with PentoSolv 3.

Pentol employee
Humberto Fustes Reyes states

being the smallest guy on the team, I have to enter through the ventilator shaft to stand on top of the heat exchanger. From this position, I can spray PentoSolv 3 with a pressure spray bottle over the surface of the heat exchanger. We wait one hour and then use the water jet to remove the foam. The delta-t of the cooling water is reduced from 17 to 8 °C, increasing the efficiency of the engine by 38 %

Ing. Humberto Fustes Reyes, Especialista Termoenergético

Task
Cleaning air filters with PentoSolv 3

Technology
PentoSolve 3 is a powerful cleaning agent designed to make cleaning in places that can only be reached with difficulty inside power stations easier. based on Pentol’s PentoMuls series, we make use of the powerful detergents we use for years to remove encrusted deposits on surfaces of cylinder heads, boiler walls, heat exchangers etc.

PentoSolve 3 is non-corrosive and can be used on any metallic surface, including aluminium and copper without attacking the surface.

For optimum results, PentoSolve 3 is sprayed without dilution on the surface to be cleaned. Leave it to work for 30 to 60 minutes and watch as the deposits are solved and foamed up. The foam and the loose deposits are easily removed by water jet.

Used product(s)