Installation of Fuel Oil Additive Injection System

This performance report is prepared after using the above technology under USAID program @ TPS Jamshoro, to ensure the cost and benefits of using fuel oil additive for fuel oil treatment.

Fuel Oil Additive dosing started in 25th April 2014

on the running units without cleaning of Boiler & Air Pre heaters, hence initially the dosing rate of the additive was adjusted at the higher side up to 200 ppm as suggested by the supplier. Fly Ash pH maintained above 4.0 and Free Acidity < 1%.

Zubair Ahemd Kazi, Additional Deputy Manager (Chemical), Jamshoro Power Company Limited

Read the complete report

Used product(s)